Jump to: navigation, search

Project Proposals:Group Based Policy Plugin

Name

Group Policy Plugin

Repo Name

groupbasedpolicy

Getting the Code

git clone https://git.opendaylight.org/gerrit/p/groupbasedpolicy.git

IRC

  1. opendaylight-group-policy (#opendaylight-policy has been deprecated as odl-meetbot is attached to the new channel)

Description

This document describes the Group Policy incubation project for OpenDaylight that introduces the notion of groups of endpoints and policy abstractions that govern communication between these groups. The goal is to support a northbound API that accepts abstract policy based on application requirements while offering numerous concrete southbound implementations for programming network element with configuration/programming stanzas rendered from application policies.

It is important to draw a distinction between the model and it's implementation. Some implementations may offer/consume a subset of either the model or another implementation.

Group Based Policy taxonomy.jpg

This approach offers a number of distinct advantages, including:

  • Easier, application-focused way of expressing policy: By creating policies that mirror application semantics, this framework provides a simpler, self-documenting mechanism for capturing policy requirements without requiring detailed knowledge of networking.
  • Improved automation: Grouping constructs allow higher level automation tools to easily manipulate groups of network endpoints simultaneously.
  • Consistency: By grouping endpoints and applying policy to groups, the framework offers a consistent and concise way to handle policy changes
  • Extensible policy model: Since the policy model is abstract and not tied to specific network implementations, it can easily capture connectivity, security, L4-7, QoS, etc.

An example use case of a multi-tier application, where different application policies are defined for different application tiers, is shown in the following figure.


App-Policy-Overview.png


Group Policy Information Model

This project will also introduce several important new primitives in the group policy model, including:

  • Groups: Groups include sets of network endpoints (potentially but not limited to virtual machines) with the same policies and requirements.
  • Policies: Policies consist of sets of rules that govern how groups interact.
  • Policy rules: Rules capture specific requirements about how groups interact. For example, a policy rule may allow HTTP traffic to a group of web servers for example. While rules capture a specific requirement, they must remain abstract and not tied to a specific hardware or software implementation.

The Group Policy information model is shown in the following figure:

this model is out of date. A new version will be linked below - dconde 3/6/14

There are labels associated with (1) EPGs that are kept within a contract or (2) to choose subjects in the contract

The labels act as selectors (with boolean operators) to choose the EPGs


Policy Model.jpg

The components in the model are as follows:

  • Group: Set of network Endpoints with the same policies.
  • Contract: a policy element that exists between Groups. A Contract can have one or more Subjects
  • Subject: Each subject can have multiple classifiers, but only a single Directive in each direction
  • Directive: a set of actions (e.g. forward, drop, …) that can be applied in each traffic direction (In, Out, In/Out); any given Subject has a single Directive, while a Directive can be applied to multiple Subjects
  • Classifier: describes a filter (match) associated with a Subject.
  • Endpoint: a single L2 or L3 identifier
  • Subnet: a section of a logical L3 IP namespace
  • Broadcast Domain (BD): Logical Layer 2 domain
  • L3 Context: Logical L3 namespace
  • Sensitivities: meta-data used by external systems in the consumption of policy constructs specified using this policy model.

The expressed policy module is a combination of the application's desires, the network's capabilities, and infrastructure policy, as shown in the following diagram:

Expressed Policy.jpg

Group Policy Components and Plugins

The Group Policy project will implement several new components and plugins:

  • Endpoint Registry: a new component that keeps track of all configured and discovered endpoints, as well as assignments of Endpoints into EPGs (Endpoint Groups). The Endpoint Registry stores its data in the SAL in the “EP DB”
  • Contract Composer: a new component that holds the Group Policy data model and provides the entry point through which applications specify contract policies. The Contract Composer stores its data in the SAL in the “C DB”
  • Affinity Decomposer: a new SB plugin that transforms Contract policies into pairwise affinity specifications defined and implemented in Affinity Metadata Service. The idea is that group-based policies may be decomposed into pairwise relationships so affinity relationships can be applied prior to rendering by a specific southbound plugin.
  • “Native Driver”: a new SB plugin that talks to a system (or systems) that can understand Group Policies directly
  • “Classic Decomposer”: a new SB plugin that decomposes Group Policies into network element configurations / programming stanzas and uses existing configuration/programming protocols (OF, Netconf, CLI, ...) to apply the configuration to Network Elements


The Group Policy plugin will use several existing OpenDaylight components:

  • The Forwarding Rules Manager: existing component that provides flow programming and other flow operations over one or more domains
  • Various protocol plugins, such as the OF1.0/1.3 plugin or the Netconf SB client plugin.
  • Affinity Service: an existing component that provides affinity services
  • Inventory: existing component that keeps track of nodes, hosts (Endpoints), ...

The design of the Group Policy plugin is shown in the following figure:

Architecture.png

Use Cases

Policy Configuration

The following figure shows the policy configuration sequence with Plexxi Affinity components.

App-Policy-Use-Case-Config1.png

The sequence is as follows:

  1. An application creates a new contract using the Contract Composer REST API (create contract). The REST API is rendered from the Contract Composer model by RESTCONF at runtime, when the Contract Composer model is loaded into the controller.
  2. RESTCONF translates the request into a transaction that adds the contract data to the Contract configuration database in the SAL. The Contract Composer validates the transaction (2a) and the new contract data is then stored in the SAL.
  3. The Contract Composer invokes an operation to push the contract into Drivers that proxy different hardware subsystems: the Native Driver and the Affinity Decomposer. The Driver can be a “Native” Driver that passes the contract transparently to systems that can natively understand contract policies or an Affinity Decomposer that can transform Contract policies into pairwise affinity specifications
  4. The Affinity Decomposer invokes the Affinity Service NB API [reference] (either Java or REST) to program the pairwise affinities. The Affinity Service translates the affinities programming into programming of physical network nodes; The Affinity Service can program OF flows in OF-capable nodes or ACLs through a device’s CLI or the Netconf configuration protocol.
  5. The Affinity Service uses the ODL Inventory Service to discover the physical nodes, and to discover the nodes’ capabilities. Through the node model’s hierarchy the Affinity Service also can access, for example, OF-capable node’s tables and flows or a netconf-capable node’s ACL models. In this step, the Affinity Service will invoke the physical node programming transaction (Across one or more physical nodes). The Inventory plugin will validate the transaction.
  6. Once the transaction is validated, the Inventory Service will invoke appropriate plugins (Forwarding Rules Manager for OF (6a), the Netconf protocol plugin for ACLs (6b), or a CLI plugin (6c), for example) to program physical network devices
  7. The Forwarding Rules Manager will talk to the OpenFlow Protocol Plugin to push the desired flow to the corresponding devices
  8. The protocol plugins will use their respective protocols to push the configuration to the physical nodes.

Scope

The full scope of the proposal is as follows:

  • Offer an additional northbound plugin based on application policy.
  • Support the Affinity MetaData Service through southbound plugin
  • Support “native” southbound plugins that can accept application policy constructs
  • Support “classic” southbound devicesmodels (openflow, etc.)

Other components might be affected by this proposal:

  • The OpenDaylight Inventory model will be extended to include the concept of a Logical Node

Relationship with OpenStack/Neutron Policy Model

The model developed within this project relates to that being developed in OpenStack in the following ways:

  1. The Neutron model being developed MUST be always renderable into the OpenDaylight policy model.
  2. The OpenDaylight model MUST NOT be constrained in any way by the Neutron model being developed.

UML Model

UML Model

Resources Committed (developers committed to working)

Cisco:

  • Mike Dvorkin <dvorkin@insiemenetworks.com>
  • Keith Burns (alagalah) <alagalah@noironetworks.com>
  • Rob Adams (readams) <adams@noironetworks.com>

Plexxi:

  • Derick Winkworth <derick.winkworth@plexxi.com>
  • Suchi Raman <suchi.raman@plexxi.com>

Midokura:

  • Stephen Wong <s3wong@midokura.com>

IBM:

  • Ryan Moats <rmoats@us.ibm.com>
  • Muthu Kothandaraman <mkothand@us.ibm.com>

Red Hat:

  • Dave Tucker <djt@redhat.com>

Initial Committers

Cisco:

  • Mike Dvorkin <dvorkin@insiemenetworks.com>
  • Kyle Mestery <kmestery@cisco.com>

Plexxi:

  • Derick Winkworth <derick.winkworth@plexxi.com>
  • Suchi Raman <suchi.raman@plexxi.com>

Midokura:

  • Stephen Wong <s3wong@midokura.com>

IBM:

  • Ryan Moats <rmoats@us.ibm.com>
  • Muthu Kothandaraman <mkothand@us.ibm.com>

Vendor Neutral

The code bse will be created as a port of the project, no existing vendor-specific code base will be used. The new code base will have no vendor package names in code and no vendor branding present in code or output of build. In addition, no vendor branding will be present in documentation.

Team Meeting Notes and Works in Progress (Google Doc)

Google Doc

Design Tasks

Architecture-tasks.png

Item1:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item2:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item3:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item4:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item5:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item6:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item7:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item8:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item9:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

Item10:

  • Owners:
  • Meeting notes (create and link to google doc)

Owners please supply description of task after item#

MD-SAL requirements/queries:

  • 1:
  • 2:
  • 3:

Meets Board Policy (including IPR)

The Project team has indicated that all code will be written from scratch once the project is approved. No existing code will be contributed, hence no ICR is necessary. [PJR-12/5/13]